RVU Calculator: Relative Value Units to Dollars (2026)

Free RVU calculator for 2026. Look up work, practice expense and malpractice RVUs by CPT code, convert RVUs to Medicare dollars for any ZIP, and estimate wRVU pay.

Updated CMS RVU26DFree · no account

Soft clay still life of three stacked weights of different sizes on a simple balance scale, the smallest weight forest green, on a warm off-white background.

An RVU calculator converts relative value units into dollars. Medicare's formula multiplies each of a code's three RVUs (work, practice expense and malpractice) by the matching geographic index for your area, adds them, and multiplies the total by the conversion factor. For 2026 the conversion factor is 33.4009 dollars per RVU for most clinicians and 33.5675 for qualifying APM participants.

Use the relative value units calculator below in three ways: look up a code's RVUs and Medicare rate for any ZIP, turn a number of RVUs into dollars, or estimate work RVU (wRVU) production pay from a list of codes and volumes. Every number comes from the current CMS release and shows its label.

Free tool · RVU calculator

What are you calculating?

How the rate is built · 99214

RVUs × geographic indexes × conversion factor

Office or facility?

Work1.92

1.92 RVUs× 1.000 GPCI

Practice expense2.00

2.00 RVUs× 1.000 GPCI

Malpractice0.14

0.14 RVUs× 1.000 GPCI

Adjusted RVUs

4.0600

Conversion factor

$33.4009

Medicare rate

$135.61

Every GPCI starts at 1.000, the national rate. Enter a ZIP or drag a slider.

Key takeaways

  • Every code has three RVUs. Total RVUs drive Medicare payment; work RVUs alone usually drive physician compensation.
  • Practice expense differs by setting: the office (non-facility) value is usually higher than the facility value.
  • GPCIs adjust each RVU for local costs, so the same code pays differently by locality.
  • 2026 brought two conversion factors and a 2.5% efficiency cut to work RVUs for most non-time-based services.

How to calculate RVUs into dollars

The formula is in the Medicare Claims Processing Manual, Chapter 12, §20.1:

From RVUs to payment

Adjusted RVUs=RVUw×GPCIw+RVUpe×GPCIpe+RVUmp×GPCImp\textsf{Adjusted RVUs} = \mathrm{RVU}_{w}\times\mathrm{GPCI}_{w} + \mathrm{RVU}_{pe}\times\mathrm{GPCI}_{pe} + \mathrm{RVU}_{mp}\times\mathrm{GPCI}_{mp}
Payment=adjusted RVUs×conversion factor\textsf{Payment} = \textsf{adjusted RVUs}\times\textsf{conversion factor}
  1. Look up the code's three RVUs in the current release: work, practice expense (facility or non-facility) and malpractice.
  2. Find your locality's GPCIs. Each ZIP maps to one of Medicare's payment localities, which has its own work, PE and malpractice index.
  3. Multiply each RVU by its GPCI and add. The result is the geographically adjusted total RVUs.
  4. Multiply by the conversion factor. That's the Medicare allowed amount for a participating clinician, before sequestration, coinsurance or other adjustments.

The calculator above breaks down any code you enter. Setting matters most for procedures: a large-joint injection, 20610, carries a much larger practice expense RVU in the office, where the practice buys the supplies, than in a facility. Toggle office vs facility below, or drag the GPCI sliders to compare a high-cost and a low-cost locality.

How the rate is built · 20610

RVUs × geographic indexes × conversion factor

Office or facility?

Work0.77

0.77 RVUs× 1.000 GPCI

Practice expense0.29

0.29 RVUs× 1.000 GPCI

Malpractice0.13

0.13 RVUs× 1.000 GPCI

Adjusted RVUs

1.1900

Conversion factor

$33.4009

Medicare rate

$39.75

Every GPCI starts at 1.000, the national rate. Enter a ZIP or drag a slider.

3RVU components per code
33.40092026 conversion factor, most clinicians
−2.5%2026 efficiency adjustment to work RVUs

What the three RVUs measure

Work RVU (wRVU). The clinician's time, skill, effort and judgment. It's the component most employment contracts pay on, and the one CMS reduced by 2.5% for 2026 on non-time-based services through its new efficiency adjustment.

Practice expense RVU (PE). Staff, equipment, supplies, rent and overhead. Each code has two values: non-facility, for services in an office where the practice carries the costs, and facility, for services in a hospital or ASC that bills Medicare separately for its costs. For 2026, CMS also changed how indirect costs are allocated, recognizing more of them for office-based practitioners than for facility-based ones. See facility vs non-facility rates and place of service codes for which applies.

Malpractice RVU (MP). The professional liability insurance cost of the service. It's the smallest piece for most codes.

RVUs by CPT code: compare a family

For coders and managers, the useful view is often a code family side by side. Here are the established-patient office visits in the current release, with each level's work RVUs and the difference from the first code. Office visits are time-based E/M services, so CMS exempted them from the 2026 efficiency adjustment.

Compare codes · National

4 codes, side by side

Office or facility?

  • 99212

    Office visit, established patient, straightforward0.7 wRVU

    $59.45

  • 99213

    Office visit, established patient, low complexity1.3 wRVU

    $95.19+$35.74

  • 99214

    Office visit, established patient, moderate complexity1.92 wRVU

    $135.61+$76.16

  • 99215

    Office visit, established patient, high complexity2.8 wRVU

    $192.39+$132.94

Need the add-on too? G2211, the visit complexity add-on, carries its own RVUs and is billed with office visits; see the G2211 guide for when it applies.

wRVU calculator: estimate compensation

Production-based physician pay usually multiplies work RVUs by a dollar rate per wRVU set in your employment contract. Practice expense and malpractice RVUs don't count. The calculator's third mode does this for a code list.

  1. List your codes and annual volumes. Use billed, paid units, not scheduled visits.
  2. Multiply each code's work RVU by its volume and add them up for total annual wRVUs.
  3. Multiply by your contract rate per wRVU. For example, 6,000 wRVUs at a contract rate of $50 per wRVU is $300,000 of production credit.

Two things change the result between years even if you do exactly the same work: CMS revaluing a code's work RVU (as with the 2026 efficiency adjustment), and contracts that pin compensation to a specific year's RVU table. Check which year your contract references.

Two conversion factors in 2026

For the first time, Medicare has two conversion factors. Clinicians who are qualifying participants in an advanced alternative payment model (APM) are paid with 33.5675; everyone else is paid with 33.4009 (CMS CY 2026 PFS final rule fact sheet). The calculator uses the non-qualifying factor, which applies to most practices. The 2026 conversion factor guide explains the history and what drove the change.

Sources: CMS Pub. 100-04, Chapter 12, §20.1; CY 2026 Medicare Physician Fee Schedule final rule (CMS-1832-F) and fact sheet; CMS RVU26D relative value and GPCI files. Verified October 6, 2026.

FAQ

How do you calculate an RVU?

You don't calculate RVUs; CMS assigns them to each code every year. You calculate payment from them: multiply each RVU by its locality GPCI, add the three, and multiply by the conversion factor.

How much does 1 RVU reimburse in 2026?

One fully adjusted RVU pays the conversion factor: 33.4009 dollars for most clinicians and 33.5675 for qualifying APM participants. In a locality with GPCIs above 1.0 an unadjusted RVU is worth more; below 1.0, less.

How many RVUs is a 99213 or 99214?

Look them up in the calculator above, which shows work, practice expense and malpractice RVUs from the current release, or open the code pages for 99213 and 99214. Office and facility totals differ because the practice expense RVU differs.

What is the difference between RVU and wRVU?

RVU usually means total RVUs, the sum of work, practice expense and malpractice, which drives what Medicare pays. A wRVU is only the work component, which most employers use to measure physician productivity.

What is a good rate per wRVU?

It varies widely by specialty, region and employer, and there's no Medicare figure for it. The rate comes from your employment contract; compare offers on the same RVU year and the same definition of credited services.

Why did my RVUs change in 2026?

Two 2026 policies: a 2.5% efficiency adjustment to work RVUs for most non-time-based services, and a change in how practice expense is allocated between office and facility settings. Time-based services such as E/M visits, care management, behavioral health, telehealth-list services and maternity codes are exempt from the efficiency adjustment.

Related: what an RVU is and how it's set, the 2026 Medicare conversion factor, contract check for comparing payer rates to Medicare, and the global period calculator for surgical codes.

Did this answer your question about RVU Calculator: Relative Value Units to Dollars (2026)?

Tell us what you were actually trying to work out. We’ll answer you directly, or build the page that does.