HCPCS code A2030: Miro3D fibers, per milligram2026 Medicare rate & RVUs

Reports Miro3D fibers by milligram; each unit represents one milligram, and Medicare payment and coverage are determined by the Medicare contractor.

CMS RVU26DEffective Oct 1, 2026109 payment localities

Medicare rate · A2030

Miro3D fibers, per milligram

Office or facility?

Work RVUs
0
Total RVUs
0.00
Global days
XXX

National rate · 2026

—

Not priced in the facility setting.

See every locality for A2030 →Billed by an NP, PA or therapist? →

Medicare allowed amount for participating (non-QP) physicians, before deductible, coinsurance and claim adjustments. Not a patient’s bill or a hospital charge.

Your location

Medicare pays by the payment locality where the service is performed.

On this page 10 sections
  1. Medicare rate
  2. What A2030 covers
  3. By payment locality
  4. Rate map
  5. How it’s calculated
  6. Payment rules
  7. Similar codes
  8. Related codes
  9. Billing questions
  10. Sources

What A2030 covers

A2030 identifies Miro3D fibers reported by weight. The measure is milligrams: one unit represents one milligram of fibers. This code is distinct from A2025, which identifies Miro3D by cubic centimeter. These codes describe the same named product using different measures, so the reported code follows whether the Miro3D quantity is expressed by weight or volume. A2030 is a technical-component-only code; a separate code covers interpretation.

Medicare lists A2030 as carrier-priced, status C: CMS publishes no national payment, and the Medicare Administrative Contractor sets payment for each claim. HCPCS pricing assigns it to contractor pricing under the physician fee schedule, while CMS coverage is left to the contractor’s judgment. These are separate determinations: contractor pricing governs payment for the claim, and contractor judgment governs coverage. Report the quantity in milligrams, with one billing unit for each milligram.

This summary was written with AI assistance from CMS physician fee schedule data and checked against the CMS billing rules shown here. Rates on this page come directly from CMS files.

Where A2030 pays more and less

The same RVUs, adjusted for each area’s costs. Open a locality for its calculation, history and nearby areas.

109 of 109 payment localities

A2030 office and facility rates by payment locality
Payment localityOfficeFacility
AlabamaUnavailableUnavailable
AlaskaUnavailableUnavailable
ArizonaUnavailableUnavailable
ArkansasUnavailableUnavailable
Atlanta, GAUnavailableUnavailable
Austin, TXUnavailableUnavailable
Bakersfield, CAUnavailableUnavailable
Baltimore area, MDUnavailableUnavailable
Beaumont, TXUnavailableUnavailable
Brazoria, TXUnavailableUnavailable

A2030 rates by state

Office rate range in each state. Select a state to see its payment localities.

Explore a state

Local rates. Clear comparisons.

Hover or focus a tile to see its rate range. Select it to open the state’s fee schedule.

View every state and territory as a table
A2030 office rate range by state
State / territoryOffice rate rangeLocalities
AKNo published base rate1
ALNo published base rate1
ARNo published base rate1
AZNo published base rate1
CANo published base rate29
CONo published base rate1
CTNo published base rate1
DCNo published base rate1
DENo published base rate1
FLNo published base rate3
GANo published base rate2
GUNo published base rate1
HINo published base rate1
IANo published base rate1
IDNo published base rate1
ILNo published base rate4
INNo published base rate1
KSNo published base rate1
KYNo published base rate1
LANo published base rate2
MANo published base rate2
MDNo published base rate3
MENo published base rate2
MINo published base rate2
MNNo published base rate1
MONo published base rate3
MSNo published base rate1
MTNo published base rate1
NCNo published base rate1
NDNo published base rate1
NENo published base rate1
NHNo published base rate1
NJNo published base rate2
NMNo published base rate1
NVNo published base rate1
NYNo published base rate5
OHNo published base rate1
OKNo published base rate1
ORNo published base rate2
PANo published base rate2
PRNo published base rate1
RINo published base rate1
SCNo published base rate1
SDNo published base rate1
TNNo published base rate1
TXNo published base rate8
UTNo published base rate1
VANo published base rate2
VINo published base rate1
VTNo published base rate1
WANo published base rate2
WINo published base rate1
WVNo published base rate1
WYNo published base rate1

How the A2030 rate is calculated

Each of A2030’s three RVUs is multiplied by a geographic index (GPCI) for the payment locality, added up, and multiplied by the conversion factor. Drag the indexes or enter a ZIP to see what moves the rate.

How the rate is built · A2030

RVUs × geographic indexes × conversion factor

Office or facility?

Work0.00

0.00 RVUs× 1.000 GPCI

Practice expense0.00

0.00 RVUs× 1.000 GPCI

Malpractice0.00

0.00 RVUs× 1.000 GPCI

Adjusted RVUs

0.0000

Conversion factor

$33.4009

Medicare rate

$0.00

Every GPCI starts at 1.000, the national rate. Enter a ZIP or drag a slider.

Payment rules and modifiers for A2030

The CMS indicators that decide how A2030 is paid alongside other services.

CMS payment indicators · A2030

Miro3D fibers, per milligram

RuleCMS valueWhat it means
Global periodXXXThe global surgery concept doesn’t apply.
Multiple procedures9The concept doesn’t apply.
Bilateral (modifier 50)9The concept doesn’t apply.
Assistant at surgery (80/81/82/AS)9The concept doesn’t apply.
Co-surgeons (62)9The concept doesn’t apply.
Team surgery (66)9The concept doesn’t apply.
Professional/technical3Technical component only.

A2030 compared with similar codes

Compare codes · National

4 codes, side by side

Office or facility?

  • A2030

    Miro3D fibers, per milligram0 wRVU

    Not priced

  • A2025

    Wound matrix, per cubic centimeter0 wRVU

    $127.26

  • A2028

    Micromatrix Flex, per milligram0 wRVU

    Not priced

  • A2023

    InnovaMatrix PD, per 1 mg0 wRVU

    Not priced

How to choose

A2025Wound matrixPer cubic centimeter
A2025 identifies Miro3D by cubic centimeter; A2030 reports Miro3D fibers by milligram. The codes use different measures.
A2028Micromatrix FlexPer milligram
A2028 identifies Micromatrix Flex per milligram, while A2030 identifies Miro3D fibers per milligram. Distinguish them by the named product.
A2023InnovaMatrix PDPer 1 mg
A2023 identifies Innovamatrix PD per 1 mg; A2030 identifies Miro3D fibers per milligram. Distinguish them by the named product.

A2030 billing questions

How is A2030 different from A2025?

A2030 reports Miro3D fibers by milligram; A2025 identifies Miro3D by cubic centimeter. The codes use different measures.

How many units should be reported?

Each A2030 unit represents 1 mg. For example, 25 mg is reported as 25 units.

Does A2030 include interpretation?

No. A2030 is technical-component-only; a separate code covers interpretation.

Does Medicare set a national payment for A2030?

No. Status C means the Medicare Administrative Contractor sets payment for each claim. HCPCS pricing assigns the code to contractor pricing under the physician fee schedule.

Who determines Medicare coverage for A2030?

The Medicare contractor determines coverage.

Where these rates come from

FeeBase calculates base physician payments from CMS work, practice-expense and malpractice RVUs, adjusted by each locality’s geographic indexes and the conversion factor. Services without a published rate are labeled, never given a made-up amount. Amounts are Medicare allowed amounts before claim adjustments: not a patient’s bill or a commercial rate.

CMS RVU26D · effective Oct 1, 2026 through the day before Jan 1, 2027

Open CMS sourceHow we calculate rates

Did this answer your question about what A2030 pays?

Tell us what you were actually trying to work out. We’ll answer you directly, or build the page that does.

Fee sheets · Coming soon

Put A2030 and the rest of your codes on one sheet

Your codes at your locality, with payer contracts beside Medicare.

Join the waitlist